zero insertion force testing socket

Brand Name:CHX

Model Number:CHX-ST001

Place of Origin:CHINA

...Socket Tester Voltage Test Socket detector EU Plug Ground Zero Line Plug Features: 1. Mini portable design, easy to carry and simple to use. 2. RCD (or GFCI) test. 3. Voltage test(with LCD). 4. Can detect the wiring status of the socket quickly and accurately. 5. Widely used in the school, laboratory, factory and other social fields. Specifications: Model EU Socket...

Brand Name:DAXIAN

Model Number:DX8345A

Place of Origin:China

Microcomputer Control Automatic Insertion and Extraction Force Testing Machine Scope of application: It is mainly used to test the insertion force and pullout force of various connectors. The intensity of processing using a microcomputer board, with peak ...

Brand Name:Pego Electronics

Model Number:PG-ASNZSFC1

Place of Origin:China

...Test Plugs with Flat Pins 1. Introduction The three-pin test plugs with flat pins are designed according to AS/NZS3112 figure C1 and clauses 3.3.4&3.8.1, for checking three-pin flat pin socket-outlets (250V max.) against full insertion test and the finger test during normal insertion test...

Brand Name:PEGO

Model Number:IEC60884-1

Place of Origin:China

IEC60884-1 Plug Socket Tester Maximum and Minimum Withdrawal Force Test Apparatus 1. Introduction Maximum and minmum withdrawal force test apparatus is designed according to IEC 60884-1 Fig 18 and Fig 19 and VDE0620. The clamping system is easy to operate...

Brand Name:PEGO GROUP

Model Number:PG-WDFA

Place of Origin:China

Maximum and Minimum Withdrawal Force Testing Equipment for BS Socket-Outlet 1. Introduction Maximum and minimum withdrawal force testing equipment is designed according to IEC 60884-1 Fig 18 and Fig 19 and VDE0620. The clamping system is easy to operate...

Brand Name:Pego Electronics

Model Number:PG-FVA

Place of Origin:China

Plug Pins Fixation Verifying Test Apparatus for Torque and Pull Force Tests on Pins 1. Introduction The plug pins fixation verifying test apparatus is designed according to IEC60335-1 clause 22.3 and IEC60065 clause 15.4.3 (b and c) , it can perform both ...

Place of Origin:Guangdong, China

Brand Name:HUAKAI

Product Overview Automatic connector insertion and extraction force testing machine is designed for accurate testing of connector insertion force, pull-out force and durability performance. The equipment is widely used in electronic connector manufacturing...

Brand Name:Jrkconn

Model Number:PGA - 12 Series

Place of Origin:Guangdong, China

...Test Sockets Straight Type Machined PGA Gold Flash Brass Terminal for CPU PGA (Pin Grid Array) sockets are a type of IC (Integrated Circuit) socket used for devices with a high number of pins arranged in a grid pattern. These sockets allow for reliable electrical connections and easy insertion/removal of PGA-packaged chips. Common pitch sizes include 1.27mm to 2.54mm, and they are widely used in CPU testing...

Brand Name:RITIAN

Model Number:M19 Series Power Connector

Place of Origin:CHINA

...Insertion Force Waterproof Power Connector Free Test Supported Product Definition The M19 Series Power Connector is a robust, circular waterproof power connector designed for reliable power transmission in demanding environments. Available in male (plug) and female (socket...

Brand Name:Sinuo

Model Number:SNQC1013

Place of Origin:China

...Force Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus: This test equipment conforms to IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. It is used to check the maximum force required when the test plug is withdrawn from the socket...

Brand Name:Pego

Model Number:PG-WDFA2

Place of Origin:China

...-1 figure 3 and figure 4 and clause 16, for verification of the maximum and minimum withdrawal force of connector/appliance outlet. The minimum withdrawal force is verified by inserting the test pin gauge to each individual connector/appliance outlet. The

Brand Name:Sinuo

Model Number:SN1017

Place of Origin:China

...Test Plugs Pins for Electric Vehicle Withdrawal Force Test Product Overview: These test plugs and gauges (test pins) are made of die steel, which are anti-rust and wear-resistant, they are the necessary accessories for withdrawal force test for electrical vehicle plugs, socket-outlets and connectors. Test Plugs: No.: Standard Figure No.: Name QTY 1 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-I sheet 1 Test...

Brand Name:DAXIAN

Model Number:DX8347

Place of Origin:China

.... Test load: 50Kg. Unit switching: Kgf, Nf, Lbf. Test stroke: 0 ~ 60mm (without clamps). Test speed: 5~30 times/min adjustable. The machine can measure tensile, tearing, peeling, splicing resistance, etc. of various materials; resistance ...

Model Number:SN2118

Brand Name:Sinuo

Place of Origin:China

...Force Test Equipment For Plug & Socket‑outlet Product Overview This apparatus is designed to meet the exacting requirements of major international standards including DIN VDE 0620-1, IEC 60884-1:2022 clause 22.1 and 22.2 Fig 25 and Fig 26. It tests whether the maximum force of pulling the plug from the socket and the minimum force...

Brand Name:Sinuo

Model Number:SN2142

Place of Origin:China

... Pull Force Test Apparatus For Socket Test Product Information: This test apparatus conforms to IEC 60884-1:2022 clause 13.4 figure 15. It is used to detect the socket structure of the screwless terminal during or after the socket is installed on ...

Brand Name:KERANG

Model Number:ZHRK2016-A

Place of Origin:China

...insertion force tester Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. The nominal capacity of syringe is selected by keyboard, and the record chart of starting force, average force, retraction force of piston, push rod pushing O-ring force and core rod movement displacement are displayed and printed in real time. The airborne printer also prints and tests

Brand Name:YUYANG

Model Number:YY095

Place of Origin:China

... the deformation of the specimen during the test. The device has two chucks connected to the photoelectric encoder mounted on the top of the measuring device through a series of transmission mechanisms. When the distance between the two chucks changes,

Brand Name:iqualitrol

Model Number:ASR-1220S

Insertion and Extraction Force Testing Machine with Max Height 150mm ASR-1220S Technical Specifications: Test load 50kg, 20kg, 5kg Resolution 0.01kg or 1g Test height 150mm Test speed 0~100mm/min X.Y axis movement range 0~75mm Transmission mechanism Ball screw Dimension & weight 360*260*940mm, 70Kg Power supply AC 110V or 220V Test Items: Connector single hole plug-in test Connector full row plug-in test Connector plug-in life test...

Brand Name:kingpo

Place of Origin:china

IEC60884 figure 20 Six Workstation Flexible Cable Cord Retention Force Test Apparatus Product details: This is a customzied 6 workstations flexible cable cord retention test apparatus.It well meets our customer's special testing requirements. The cord ...