zero insertion force testing socket

Place of Origin:China

Brand Name:BONAD

Model Number:BND-14AB

...Socket protective test probe with 1N and 20N force Product Description IEC60884 Socket protective test probe with 1N and 20N BND-14AB Technical Parameters: 1, Test Probe Length:80mm 2,Probe Diameter:1.0mm 3,Material:The handle is made of nylon, tip is made of hardened steel 4,Standard: IEC60884 ,IEC61032 Fig.10 1 Product Explanation The socket protection door test...

Brand Name:XTK

Model Number:Phone Jack

Place of Origin:Guangdong,China

... resistance 50mΩ MAX. Insulation resistance 100mΩ Min.500V DC Withstand voltage 500V AC for 1Min Life test 5000 (times) Insertion force 3-20N waterproof level IP67 Certification ROHS Advantage Even if we receive an inquiry in the early morning, we

Brand Name:Innovation

Model Number:HZFS-010

Place of Origin:China

...Force Sensor Stainless Steel Mini Load Cell and Force Sensor 5~100kg for tension and compression testing instruments HZFS-010 Mini Force Sensor Detailed Product Description: Capacity: 5~100kg Recommended Excitation: 2.5-5V Material : Stainless Steel Mainly applied in tension and compression testing instruments , automatic equipments and testing fields,such as insertion force test...

Brand Name:kingpo

Model Number:KP-U9873

Place of Origin:china

...test device is used for wall mounting secureness test as per UL498 figure 143.2. It is used to check when the socket installed on the test wall, then add force through the spring device, checking whether the installation of the socket is shift and test wall is damaged. The test device is easy to be operated, the test times (up to 9999 times) can be preset, the test...

Brand Name:Ruijia

Place of Origin:China

... for the vehicle's braking force test. Dimension Specifications Specification Rated capacity 0.5-1.5(KN) Comprehensive error 0.3%F.S Rated output 1.5mv/v Creep ±0.05%F.S /30min Zero balance ±1%F.S Temp.effect on zero ±0.05%F.S /10℃ Temp.effect on

Brand Name:Sinuo

Model Number:SNQC1013C

Place of Origin:China

.... Application: The structure of the charging interface should make it easy to insert and remove the charging gun, and should prevent the charging gun from falling out of the socket during normal use. Check whether the maximum force required to pull the

Brand Name:HongCe

Model Number:CR-6

Place of Origin:China

Flexible Cable Cord Retention Force Test Apparatus IEC60884 Figure 20 , VDE0620 Product details: HongTong has customzied a 6 workstations flexible cable cord retention test apparatus, it well meets our customer's special testing requirements. The cord ...

Brand Name:Sinuo

Model Number:SNQC1007

Place of Origin:China

...Test Device for Vehicle Plug and Socket Complied Standards & Clauses Conforms to UL2594 clause 55.4, IEC62196-1:2014 clause 25.3 and figure 17 and table 11, IEC60309-1:2012 clause 23.3, etc. Product Overview It is used to test the ability of charging vehicle plug and socket, and connection cable accessories to withstand specified pulling force and torque. The pulling force...

Brand Name:DAXIAN

Model Number:DX8326

Place of Origin:China

...Testing Equipment for IEC884-1 Standard Standard: Designed in accordance with the relevant standards of GB2099.1, IEC884-1 and other electrical accessories, it is mainly used to detect the maximum force required when the plug is withdrawn from the socket and the required force for pulling out the single-pole plug from the socket assembly. The main test is the two-pole 10A, three-pole 10A and 16A test plugs and 10A, 16A test

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

...Socket Tester Torque Test Device Standard with Plug Socket Tester: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed socket-outlet complying with this standard, the socket...

Place of Origin:China

Brand Name:HongCe

Model Number:SOB-1

IEC60065 Figure 11 Socket-outlet Torque Balance Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug ...

Brand Name:I-SUNTOP

Model Number:iso-7894

Place of Origin:china

... Life Testing Machine Electrical Switch, Plug and Socket Service Life Tester for Mobile phone/computer/USB plug machine is suitable for many kinds of connector plug and pull test, adopt embedded microcomputer measure and control technology. It can show the

Brand Name:iqualitrol

Model Number:AST-J

... doing the push pull force insertion force and destructive experiment. Features: 1:Hand press, operate simply and firmly. 2:Compact structure, gear and rack transmission. 3:Fix firmly, ...

Brand Name:Innovation

Model Number:INFS-013

Place of Origin:China

...Force Sensor 5-100KG Tension S Type mini Load Cell/Force Sensor 5-10V for automatic equipments INFS-013 5-100KG Stainless Steel Tension S type Load Cell/Force Sensor Detailed Product Description: Mainly applied in tension and compression testing instruments , automatic equipments and testing fields,such as insertion force test...

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

... of the pressure plate, of the base and of the specimens being (23 ± 2) °C and the force applied being 300 N. The specimens are first placed in position a), as shown in figure 8, and the force is applied for 1 min. They are then placed in position b),

Brand Name:PEGO

Model Number:JIS8303

Place of Origin:China

...Socket Tester Japanese Stainless Steel Plug Socket Gauge No. Figure number Gauge description 1 JIS C8303 Figure A.1 JIS C8282-1:2010 CL22.1 Maximum retaining force gauge (15A125V two-pole) 2 JIS C8303 Figure A.1 JIS C8282-1:2010 CL22.2 Minimum retaining force gauge (15A125Vtwo-pole) 3 JIS C8303 Figure A.1 JIS C8282-1:2010 CL19 Test plug for temperature rise test...

Brand Name:HeJin

Model Number:HC9933

Place of Origin:China

Plug Socket Test Equipment Ball Pressure Test Apparatus Made Of Stainless Steel Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 25.2, 25.3 and figure 37 Application: This ...

Brand Name:Sinuo

Model Number:SNQC1013C

Place of Origin:China

.... Application: The structure of the charging interface should make it easy to insert and remove the charging gun, and should prevent the charging gun from falling out of the socket during normal use. Check whether the maximum force required to pull the

Place of Origin:China

Brand Name:KeRang

Socket-outlet Torque Balance SOB-1 Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally ...

Brand Name:HeJin

Model Number:HC9902

Place of Origin:China

....1, 24.5 and figure 8 Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show