touch probe cnc

Model Number:TP13

... Probe This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is plastic, tip is stainless steel.

Brand Name:KingPo

Place of Origin:China

...Probe IEC 61032 Figure 12 Figure 13 Standard IEC61032 Figure 12 Figure 13 Children Test Finger Probe 18 And 19 Product information: Children finger probe HT-I12 conforms to IEC61032 figure 12 finger probe 18, IEC335.1,UL1017 standards. It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Children finger probe...

Model Number:C5-1 X5-1 S5-1 L12-3 L12-4 C9-4V

Place of Origin:ORIGINAL

...Oximeter / Ultralsoumd Probe Sell and Replace: Mainboard, Circuit board, Power strip,panel, Battery, SP O2 and ECG module, Parameter module, Display screen, Touch screen, Encoder, Keyboard plate, Sensor, Probe, Cable ,high voltage boards and adaptors ect.

Brand Name:HJ

Model Number:HT-I18

Place of Origin:China

... strength of audio,video and similar electronic apparatus. Test sample: Audio,video and similar electronic apparatus.Test Finger Probe Feature: It is used to test whether the dangerous electric parts can be touched.

Brand Name:HJ

Model Number:HT-I22

Place of Origin:China

...: It is applicable for the non-removable components which are used for electric shocking water or touching the movement parts to see whether they can go through the mechanical stress that happened in normal use. Thus to judge the components conform to the

Brand Name:PEGO Electronics

Model Number:PG-TPR8

Place of Origin:China

... 20.102 and GB4706 clause 20.102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The cylindrical rod from any position between the vertical and an angle of

Brand Name:PEGO

Model Number:PG-TP11

Place of Origin:China

... B.1, IEC60884-1 clause 10.1, AS/NZS3112 clause 3.14.12.4 and Appendix K3 requirements. It is used to test the protection of human body from touching dangerous parts, and can also

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I31

...: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I33

...IEC60335-2-14 requirement. Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N.The appliance shall not operated. Standard:IEC60335-2-14. Application:The

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I22

...Probe For Non-Removable Components , IEC 60335 Figure 7 Product information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the non-removable components which are used for electric shocking water or touching...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I33

...IEC60335-2-14 requirement. Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N.The appliance shall not operated. Standard:IEC60335-2-14. Application:The

Brand Name:LiFong

Model Number:LF-23232

Place of Origin:china

...CNC machining--Dilling Holes/ Threading-- Quality Check (dimension and surface) -- Acid Washing-- Sanding Blasting-- Silver Anodize -- FQC (Surface Vision Checking)-- Packing 2. Black Finish Brings Very High End Surface Looking and Good Feeling For Touching. Facility: CNC Machining Workshop Advantages: Professional Research and Design Team, Processes All Necessary Equipments: Extrusion Machine: 2 Sets; CNC...

Model Number:TP13

... Probe This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is plastic, tip is stainless steel.

Model Number:TP18/19

Toy Safety Accessibility Probe, small child test finger probe,toy safety test Accessibility Probe Can touch A/B of stretch forward the cent two kinds of model numbers, the A model number applies the toy that the child under 3 years of age use and the B ...

Brand Name:kerang

Model Number:HT-I29

Place of Origin:CHINA

...Probe HT-I29 Standard:IEC60598-2-20 clause 20.11.2. Application:It is used for testing the string lights which can not make all of the metal intertexture or other metal decorating parts charged. Test sample:String lights. Feature:It shall not be possible to touch live parts with this probe when the probe is applied in any position of the lamp which is installed with the chain with a force not exceeding 0.5 N. Parameters: Model HT-I29 Probe

Brand Name:KingPo

Place of Origin:China

... metal decorating parts charged. It shall not be possible to touch live parts with this probe when the probe is applied in any position of the lamp which is installed with the chain with a force not exceeding 0.5 N. This flat probe, 0.5 mm thickness and 8

Brand Name:KingPo

Place of Origin:China

... Product information: The blender probe complies with IEC60335-2-14 CI.20.102. It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. The test is achieved by

Brand Name:Goldway

..., Oximeter for repairing and accessories for selling. B. Mainboard, Power Stripe/Panel, Touch Screen, Viewing screen, Button Board, ECG/Oximeter/Blood Press Module for repairing and selling. C. Medical Patient Monitor/...