tackifying resin

Place of Origin:China

Brand Name:CB-RBB

Model Number:RUBBER CHEMICALS

... max. 0.5 Heat loss, (%) max.105℃ 0.5 *Softening point can be adjusted as per instruction Application: WDH-B has an outstanding performance compared to traditional tackifying resin. It can not only give rubbers remarkable initial viscosity, but also have

Brand Name:WeiLi

Model Number:WQ - PR5100

Place of Origin:China

...natural latex, white latex, etc. It has an enhanced bonding effect on surfaces with high or low surface activity. It has an excellent tackifying effect when used in natural latex, white latex, chloroprene rubber, acrylic emulsion and SBR emulsion, and can

Brand Name:Upperbond

Model Number:Maker

Place of Origin:China

... to appear darker than non-polar fully saturated substances; when a water-clear appearance is desired, suitable polymers and additives, e.g. hydrogenated tackifying resins, have to be used.The adhesives are usually

Place of Origin:Jiangsu, China

Brand Name:Wuxi East Group

Model Number:EG-301.14

...Adhesive Hot melt EVAs are made from a combination of solid thermoplastic copolymers, tackifying resins, and waxes that function with the right viscosity when applied in the bookbinding operations. EVA adhesives demonstrate strong adhesive properties, but mos...

Brand Name:Esun

Model Number:ES206

Place of Origin:Guangdong,China

... adhesion textile and washable properties for textile products. Polyester hot melt adhesive powder is composed of a polyester resin and a tackifier which gives it its adhesive properties. The polyester resin is typically a copolyester, which is a type

Brand Name:HOPE

Model Number:HPMI-06

Place of Origin:China

..., sticking wood, etc Specification: Diameter 7mm, 11mm Length 10mm, 170mm, 200mm, 250mm, 270mm, 300mm ,etc. Material EVA, Tackifying resin, antioxidant Color White, Transparent, Black, Yellow, Red, Blue, Green, etc. Curing time 10~15 Seconds Softening ...

Brand Name:TUNSING

Model Number:DS318

Place of Origin:China Shenzhen

..., such as bonding, laminating, and sealing. 2. Hot melt film is made from a mixture of thermoplastic resins, such as polyethylene, polypropylene, or polyester, along with additives, such as tackifiers, stabilizers, and waxes. 3. Hot melt film can also

Brand Name:UPTOGETHER

Model Number:P19

Place of Origin:Jiangsu, China (Mainland)

DQ series of primer for cold applied tape is is made up of butyl rubber, unsaponifiable resins, tackifier, stabilizer, and solvent.The primer is applied to the appropriately prepared pipe surface before application of anti corrosion tape. It is used for ...