stepper motor arduino

Brand Name:VIC-TECH

Model Number:SM10-816G

Place of Origin:China

..., the reduction ratio can be customized according to customer needs. Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor rotation angle resolution can reach 0.05~6 degrees,

Brand Name:VIC-TECH

Model Number:15BY45-50G

Place of Origin:China

...gear ratio 1:50 15mm geared stepper motor 2 phase 4 wires 18° stepper motor with gear box 15mm Cheap Planetary Plastic Stepper Motor with Gearbox Planetary plastic gear plus 15mm stepping motor Small size dc gear motor with low speed and big torque ...

Brand Name:VIC-TECH

Model Number:25BYZ-A022-01D

Place of Origin:China

...stepper motor 12VDC 53Ω 4 lines high torque stepper motor ​25BYZ-A022-01D is a special product of the company.Stepper motor whit a lead screw, lead with a anti-rotation bracket. the rotor with a nut, when rotor running CW or CCW,the lead screw will go forword or backword. motor step angle is 15degree, lead pitch is 1mm, when motor rotate one step, the lead move 0.0417mm It converts the rotation of the motor...

Brand Name:VIC-TECH

Model Number:25BYZ-A022-01D

Place of Origin:China

... rotor with a nut, when rotor running CW or CCW,the lead screw will go forword or backword. motor step angle is 15degree, lead pitch is 1mm, when motor rotate one step, the lead move 0.0417mm Mechanical Dimension:MM Technical Features 25BYZ-A022-01D is a

Brand Name:VIC-TECH

Model Number:25BYT48-12Q

Place of Origin:China

...Stepper motor linear actuators 2 phase stepper motor with lead screw 25BYT48-12Q is a special product of the company. The diameter of the motor is 28mm, and the stepper motor is equipped with a screw and an anti rotation mechanism. The rotor with plastic nuts converts the rotation of the motor into linear motion through the relative motion between the internal rotor and the screw. The length of the motor...

Brand Name:VIC-TECH

Model Number:VSM0613

Place of Origin:Jiangsu, China (Mainland)

...stepper motor 3.3V 2 phase pm stepper motor for camera lenses This product is a precision micro stepping motor body outer diameter 6MM, body length 7MM, shaft outer diameter 1MM, the shaft length can be appropriately changed according to the needs, and can be equipped with gears, pulleys, worms, screw rods, etc. Output device. The motor has a basic step angle of 18 degrees and the motor...

Brand Name:VIC-TECH

Model Number:VSM0810

Place of Origin:Jiangsu, China (Mainland)

... 1MM, the shaft length can be changed according to the needs, and can be equipped with gears, pulleys, Corresponding output devices such as worm and screw. The motor has a basic step angle of 18 degrees and the motor runs 20 steps per week. Because of

Brand Name:VIC-TECH

Model Number:VSM10152

Place of Origin:Jiangsu, China (Mainland)

... the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displacement can reach 0.02mm, to achieve the purpose of precision control.

Brand Name:VIC-TECH

Model Number:VSM10198

Place of Origin:Jiangsu, China (Mainland)

...stepper motor 2 phase pm stepper motor VSM10198 is a precision lead screw motor ,the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor...

Brand Name:VIC-TECH

Model Number:VSM0825

Place of Origin:Jiangsu, China (Mainland)

...stepper motor 2 phase pm stepper motor for precision medical devices VSM0825 is a precision micro step motor, the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor...

Brand Name:VIC-TECH

Model Number:VSM0613

Place of Origin:Jiangsu, China (Mainland)

... 1MM, the shaft length can be appropriately changed according to the needs, and can be equipped with gears, pulleys, worms, screw rods, etc. Output device. The motor has a basic step angle of 18 degrees and the motor runs 20 steps per week. Because of its

Brand Name:VIC-TECH

Model Number:SWT-256M

Place of Origin:Jiangsu, China (Mainland)

... technology. The pure sinusoidal precision current control technology adopted by SWT-256M can improve the above problems well, so that the running effect of the stepping motor is close to the servo level to some extent.

Brand Name:VIC-TECH

Model Number:35BYG301-18A

Place of Origin:Jiangsu, China (Mainland)

...stepper motor 1.8 degree per step 2 phase hybrid stepper motor for Engraving Machine Medical Equipment Our stepper motor series are: 20mm, 28mm, 35mm, 39mm, 42mm, 57mm, 60mm, 86mm, 110mm, 130mm. Two-phase, three-phase and four-phase hybrid stepping motor. The DC brushless motor...

Brand Name:VIC-TECH

Model Number:39BYG

Place of Origin:Jiangsu, China (Mainland)

... NEMA16 hybrid stepper motor 2 phase step motor 1.8° per step Our stepper motor series are: 20mm, 28mm, 35mm, 39mm, 42mm, 57mm, 60mm, 86mm, 110mm, 130mm. Two-phase, three-phase and four-phase hybrid stepping motor. The DC brushless motor range includes ...

Brand Name:VIC-TECH

Model Number:25S-024-278

Place of Origin:China

... compared with similar products, this product has the advantages of stable rotation, small positioning torque and high efficiency. All metal parts such as motor casings are treated by environmentally friendly plating. The appearance is exquisite and can be

Brand Name:VIC-TECH

Model Number:VSM08248

Place of Origin:Jiangsu, China (Mainland)

...stepper motor 8mm 2 phase With screw pm stepper motor for precision instrument VSM08248 is a precision micro stepping motor body outer diameter 8MM, shaft outer diameter 1MM, the shaft length can be changed according to the needs, and can be equipped with gears, pulleys, Corresponding output devices such as worm and screw. The motor has a basic step angle of 18 degrees and the motor...

Brand Name:VIC-TECH

Model Number:SM5-PG-Linear

Place of Origin:Jiangsu, China (Mainland)

...stepper motor with gearbox and slider This motor is a 5mm diameter stepper motor, attached with 20.25:1 gear ratio gearbox. This is a linear stepper motor, and the lead screw pitch 0.4mm, and it has 6 starts, so lead of lead screw is 2.4mm. The effective stroke of this motor is about 8mm, and slider can move up and down based on driver’s set up. This motor...

Brand Name:VIC-TECH

Model Number:SM10-100G-18M5

Place of Origin:China

...the motor is 10mm, the resistance of each phase of the motor is 18Ω, the step angle is 18 °, and each revolution is 20 steps. The wiring type is lead, and there are 4 wires (red, white, black, brown) for the motor lead housing, red and white are phase A,

Brand Name:VIC-TECH

Model Number:VSM10152

Place of Origin:Jiangsu, China (Mainland)

...4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displacement can reach 0.02mm, to achieve the purpose of

Brand Name:VIC-TECH

Model Number:VSM10155

Place of Origin:Jiangsu, China (Mainland)

...4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displacement can reach 0.02mm, to achieve the purpose of