single direct attach passive cable

Brand Name:Hilink

Model Number:25G SFP28 DAC Cable

Place of Origin:Guangdong, China

Passive Direct Attach Copper DAC 25G SFP28 30AWG SFP+ Cable 1M 2M The SFP28 passive cable assemblies are high performance, cost effective I/O solutions for 25G Ethernet. SFP28 copper cables allow hardware manufactures to achieve high port density, ...

Brand Name:NuFiber

Model Number:10G-DAC-1M

Place of Origin:China

...Direct Attach Copper cable Passive 10G-DAC-1M Description Nufiber’s high speed SFP+ Direct Attach Cable (DAC) provides high performance in 10 Gigabit Ethernet (10GbE) network applications, using an enhanced SFP+ connector to send 10Gbps data through one paired transmitters and receivers over a thin twinax cable...

Brand Name:NUFIBER

Model Number:QSFP-40G-DxM

Place of Origin:China

... a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. These cables are used for 40GbE and Infniband standards, to maximize performance. QSFP+

Brand Name:HILINK

Model Number:HL-SFP-DAC-5m

Place of Origin:China

...Direct Attach Copper Cable For Ultra High Bandwidth Switches / Routers The SFP-H10GB-CU5M is a passive copper direct attach cable (DAC) with SFP+ connectors and has 5m length. Cable provides short distance (same shelf) inexpensive connectivity at 10G rates between two 10G data ports. Cable...

Brand Name:HILINK

Model Number:200G QSFP56 DAC

Place of Origin:China

...Passive Direct Attach Copper Twinax Cable 1M Datacenter/Network General 200G QSFP56 passive cable assembly products, based on 4X25G/4X28G or 4*50G/4*56G (PAM-4) structure, this product can well meet the needs of next-generation 2X100G switches, servers, routers and other product applications. Features: • Compliant with QSFP + MSA and SFF-8636 • Support hot swap, low crosstalk, low power consumption • Provide cable

Brand Name:HILINK

Model Number:HL-DAC-100G-CU-3m

Place of Origin:China

... for high-density applications. The hot-pluggable transceiver integrates 4 transmitting and 4 receiving channels. Hilink 100G QSFP28 Direct Attach Cables are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to

Brand Name:Topnet System OR OEM

Model Number:40G QSFP+ DAC

Place of Origin:Shenzhen China

...+ Temp: 0~70 40 Gigabit Ethernet Qsfp+ Direct Attach Passive Copper Cable Assembly 3m Length Overview QSFP+ copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+

Brand Name:Topnet System OR OEM

Model Number:40G QSFP+ DAC

Place of Origin:Shenzhen China

...70 40 Gigabit Ethernet Qsfp+ Direct Attach Passive Copper Cable Assembly 3m Length Overview QSFP+ copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of

Place of Origin:Shenzhen,China

Brand Name:AscentOptics/Neuter, OEM

Model Number:CAB-QSFP/4SFP-P2M

...Direct Attach Breakout Cable FOR Routers , 2 M Passive Specifications: Part Number Product Description AWG QSFP+ (40G) to 4x SFP+ (10G) Cable CAB-QSFP/4SFP-P50CM 40GBASE-CR4 QSFP+ to four 10GBASE-CU SFP+ direct attach breakout cable, 0.5 meter passive 30 CAB-QSFP/4SFP-P1M 40GBASE-CR4 QSFP+ to four 10GBASE-CU SFP+ direct attach breakout cable, 1 meter passive 30 CAB-QSFP/4SFP-P2M 40GBASE-CR4 QSFP+ to four 10GBASE-CU SFP+ direct attach

Brand Name:Sourcelight or OEM

Model Number:40G QSFP+ TO 4SFP+ DAC

Place of Origin:Shenzhen,China

... interconnects . The Hybrid cables are compliant with SFF-8436 and SFF-8431 specifications. It is offer a low power consumption,short reach interconnect applications. The cable each lane is capable of transmitting data at rates up to 10Gb/s, providing an

Brand Name:HILINK

Model Number:SFP-H10GB-CU3M

Place of Origin:China

...ch connects 10Gb/s host systems at a much lower cost than optical transceivers. Its Copper DAC Twinax cables lenght up to 15meter. Length is customised on your requirement. Our range of SFP+ DAC cable are 100% Compatible with Cisco, Alcatel-Lucent, H3C,

Brand Name:HILINK

Model Number:HL-SFP-H10GB-CU5M

Place of Origin:China

...Direct Attach Copper Cable , SFP+ To SFP+ Cable SFP-H10GB-CU5M The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable...

Brand Name:HILINK

Model Number:SFP-H10GB-CU1M

Place of Origin:China

... and 10G Fibre Channel applications. SFP+ passive copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the

Brand Name:Sourcelight or OEM

Model Number:40G QSFP+ DAC

Place of Origin:Shenzhen,China

...Direct Attach Passive Copper Cable Assembly 3m Length Overview QSFP+ copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. These cables...

Brand Name:Sourcelight or OEM

Model Number:QSFP-H40G-1M

Place of Origin:Shenzhen,China

...-attach copper cable, 0.5 meter passive 30 CAB-QSFP-1M 40GBASE-CR4 QSFP+ direct-attach copper cable, 1 meter passive 30 CAB-QSFP-2M 40GBASE-CR4 QSFP+ direct-attach copper cable, 2 meters passive 30 CAB-QSFP-3M 40GBASE-CR4 QSFP+ direct-attach copper cable,

Brand Name:HILINK

Model Number:HL-DAC-40G-CU-1m

Place of Origin:China

... for high-density applications. The hot-pluggable transceiver integrates 4 transmitting and 4 receiving channels. These QSFP+ cable assemblies can replace four standard SFP+ cable assemblies. This results in higher port density, more cost effectiveness and

Brand Name:HILINK

Model Number:HL-DAC-200G-Q56-CU-2m

Place of Origin:China

200G QSFP56 to QSFP56 DAC Cable Direct Attach Twinax Cable 2M (7ft) General Description Hilink's HL-QS56-200G-DAC 200G QSFP56 Passive Cables assembly feature eight differential copper pairs,providing four data transmission channels at speeds up to 56Gbps(...

Brand Name:HILINK

Model Number:25G SFP28 DAC

Place of Origin:China

...3m Data Center Passive Sfp Copper Cable General Description SFP28 Direct Attach Cables are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m). ...

Brand Name:HILINK

Model Number:SFP28-QSFP28-CX

Place of Origin:China

...cables allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget Features • Up to ...

Brand Name:sourcelight or OEM

Model Number:SFP + Direct Attach Cable

Place of Origin:Shenzhen,China

Passive 10g Sfp+ Direct Attach Copper Cable / 30awg Copper Twinax Cable Overview The SFP+ active cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable...