power socket tester

Brand Name:PEGO

Model Number:PG-WDF

Place of Origin:China

Plug Socket Withdrawal Force Testing Equipment According to IEC60884-1 and VDE620 1. Introduction Maximum and minimum withdrawal force testing equipment is designed according to IEC60884 figure 18/19 and VDE0620, it is applied to evaluate the maximum and ...

Brand Name:PEGO

Model Number:PG-TIS166

Place of Origin:China

TIS166-2549 plug and socket-outlet test gauges 1. Introduction The gauges are strictly designed according to TIS166-2549, in figure A.1 to A.5 are used to check dimensions of the socket-outlet and gauges in figure A.6 to A.7 are used to check pulling force...

Brand Name:PEGO GROUP

Model Number:GB/T 1002-2021

Place of Origin:China

GB/T1002-2021 Single-Phase Plug and Socket-Outlet Test Gauges 1. Introduction The single phase plug and socket-outlet test Gauges are designed according to GB1002-2021 figures 8/9/10/11/12/13/14/15/16. They are applicable to verify the single phase plugs...

Place of Origin:China

Brand Name:KeRang

...,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with

Place of Origin:China

Brand Name:KeRang

...Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug or portable socket...

Place of Origin:China

Brand Name:KeRang

...Socket Endurance Tester SLT-2 Product overview: This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test of breaking volume of plug and socket...

Place of Origin:China

Brand Name:HongCe

Model Number:SG-1

Screwed Glands Tester Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres...

Brand Name:HongCe

Model Number:HC9928

Place of Origin:China

IEC60884 Clause 24 Clause 24.10 Figure 30 Testing Equipment Of Single Station Fixation Pins In The Body Of The Plug Tester Standard: IEC 60884-1 2013 clause 24.10 and figure 30 Application: This device is use to verify the fixation of pins in the body of ...

Brand Name:PEGO GROUP

Model Number:PG-TB3

Place of Origin:China

BS1363-1 Figure 20 Plug Socket-Outlet Tumbling Barrel Made by Thick Plywood 1. Introduction Tumbling barrel is designed according to BS1363.1 figure 20 for plug ballast, transformers and socket outlet. The tumbling barrel is turned at a rate of five ...

Place of Origin:China

Brand Name:HongCe

Model Number:LP-3

Load Box For Lab Equipment Testing Product overview: This load box is designed and manufactured according to IEC60884,IEC61058,IEC606691 standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for ...

Place of Origin:China

Brand Name:HongCe

Model Number:PH-1

Pendulum Hammer Test Apparatus Product details: This testing device conforms to many standard requirements like IEC60068-2-75 IEC0884-1fig22-26. It is used for the mechanical strength test of Household and similar use of plug socket, some electrical ...

Place of Origin:China

Brand Name:HongCe

Model Number:PH-1

Pendulum Hammer Test Apparatus Product details: This testing device conforms to many standard requirements like IEC60068-2-75 IEC0884-1fig22-26. It is used for the mechanical strength test of Household and similar use of plug socket, some electrical ...

Brand Name:HongCe

Place of Origin:China

Gauges For GOST 7396.1-89 (IEC 83-75), Group C STG-1G For Measuring Russia Standard Plug And Socket Product information: This testing device conforms to GOST 7396.1-89 (IEC 83-75), Group C figure 1 and figure 2. The gauge in figure 1 is used for verify...

Brand Name:HongCe

Model Number:HC9914B

Place of Origin:China

Product Introduction The test machine is designed and manufactured according to IEC60884-1clause 20 and 21 fig 16, IEC60669-1 and etc. It is applicable for the switches breaking capacity and normal operation life test of household and similar fixed ...

Brand Name:HongCe

Model Number:HC9931

Place of Origin:China

IEC60884-1 clause 24.18 figure 35. Verification of groove hole and reverse taper gauge Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.18, figure 35. Application: It is used to ...

Place of Origin:China

Brand Name:HABOTEST

Model Number:HT106E/B/D

Packaging & Shipping Habotest HT106 uk/us/eu standard LED plug wall socket tester with RCD and GFCI test Lead Time : Quantity(Pieces) 1 - 40 41 - 1000 >1000 Est. Time(days) 3 25 To be ...

Place of Origin:Guangdong, China

Brand Name:HABOTEST

Model Number:HT106D

Company Information Dongguan Habotest Instrument Technology Co.,Ltd is an innovation orientied technology enterprise with an over 20 years R&D team, injection molding, professional production line and assembly capabilities. We offering professional and ...

Brand Name:kingpo

Place of Origin:china

American Standard UL498 plug and socket gauge Gauge drawing number standard number number name 1 Articulate probe with web stop Figure 9.1 UL 498 1 2 Probe figure 10.1 UL 498 1 3 Flat probe figure 31.1 UL 498 1 4 Reference plug 5 the simulation of plug ...

Brand Name:kingpo

Place of Origin:china

American Standard UL498 plug and socket gauge Gauge drawing number standard number number name 1 Articulate probe with web stop Figure 9.1 UL 498 1 2 Probe figure 10.1 UL 498 1 3 Flat probe figure 31.1 UL 498 1 4 Reference plug 5 the simulation of plug ...

Brand Name:kingpo

Place of Origin:china

UL498 Figure 119.1 | Test Pin A American Standard UL498 plug and socket gauge Gauge drawing number standard number number name 1 Articulate probe with web stop Figure 9.1 UL 498 1 2 Probe figure 10.1 UL 498 1 3 Flat probe figure 31.1 UL 498 1 4 Reference ...