plastic testing lab

Brand Name:Sinuo

Model Number:SN334

Place of Origin:China

... Performance " This Tower/ table/Comfort fans and regulators Energy Efficiency Test Lab is developed in compliance with IEC 60879:2019, ES 7821:2024, and other applicable standards. It enables precise measurement of key performance ...

Brand Name:Infinity Machine

Model Number:RS-8215A / RS-8215B

Place of Origin:Made in China

...various tough materials which endure the impact at specified angle and load. Test standards: IZOD: ASTM D256, ISO 180, GB/T 1843. JIS K7110 CHARPY: ASTM D6110, ISO 179, GB/T1043 Features: After test, test results show automatically and they can be saved or

Brand Name:Infinity Machine

Model Number:RS-8233

Place of Origin:Made in China

... point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic material 0.26mm, hard rubber material 0.25～ 0.33mm), the temperature will be the

Brand Name:Infinity Machine

Model Number:RS-8233

Place of Origin:Made in China

...Plastic Testing Equipment Heating Distortion Resistance Testing Application: Apply for plastic heating deformation resistance testing, put the testing sample on two supporting point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic...

Brand Name:Infinity Machine

Model Number:RS-8000A

Place of Origin:Made in China

...Plastic Testing Machines , Plastic Testing Instruments 300KN Capacity Model: RS-8000A Purpose: This testing machine is suitable for adhesive tape, rubber, plastic, sponge, waterproof materials, electric wire & cable, textile, net rope, non-woven fabrics etc, nonmetal materials and metallic thread, metal foil, steel plate and metal rod to do tensile, compression, bending, peeling, cutting, tearing shearing tests...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

..., POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. ​It's is a high precise melt testing instruments for the measurement of melt flow rate (MFR)/(MI)

Model Number:LR-A017

Place of Origin:China

Brand Name:Lonroy

...Plastic Testing Machine Plasticity Test Machine 220V 5A Plastic Test 1. Test Standards GB / T 12828 (raw rubber and rubber compound determination of plasticity and recovery values) 2. Use Rubber-weiss plasticity testing machine is produced according to standards for testing of plastic values for raw rubber, plastic...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

... Plastic Testing Machine JIS-K7210 Melt Flow Indexer Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexer Principle: Thermoplastic melt flow rate (melt index) is plastic at

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

... (MVR) in quality control and research applications. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and

Brand Name:LIYI

Model Number:LY-XB22

Place of Origin:CHINA

... nylon, fiberglass, ceramics, cast stone, insulation materials and other non-metallic materials. It is the ideal testing equipment in the chemical industry, scientific research institutes, universities and quality testing departments. Characteristics:

Brand Name:LIYI

Model Number:LY-3020

Place of Origin:CHINA

..., food, plastic film, wafer processing and manufacturing industries as well as scientific research units, quality inspection departments and schools. Meet standards: GB ...

Brand Name:LIYI

Model Number:LY-3010

Place of Origin:CHINA

..., soft leather, synthetic leather such material abrasion test, with the highly efficient, good reproducibility and easy operation properties. Design Standards: DIN-53516,ASTM D5963,ISO-4649,...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Plastic Testing Equipment Specifications Melt Flow testing machine 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factory 1.Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexer Electronic MFR Plastic Melt Flow Index Testing...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Plastic Testing Equipment Specifications Melt Flow testing machine 1. Melt Flow Indexer is used to determine melt-mass flow rate . 2. High quality,melt indexer 3. Direct factory 1. Melt Flow testing for PP and PE 1. Melt index tester is used to determine melt-mass flow rate (MFR). 2. High quality,melt indexer Electronic MFR Plastic Melt Flow Index Testing...

Brand Name:Haida

Model Number:HD-E701

Place of Origin:china

...Test Chamber , Environmental Testing Lab for Polymer Materials Product introduction: Air Ventilation Aging Test Chamber is used to test the material characteristic for wire type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing...

Brand Name:ASLi

Model Number:AS-DT-200

Place of Origin:China

...Testing Lab Test Equipment , Single Arm Drop Test Machine Application: AS-DT-200 Falling Impact Testing Machine, Single-arm Drop Test Machine is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design. Single-arm Drop Test...

Brand Name:ASLi

Model Number:AS-DT-200

Place of Origin:China

...Testing Lab Test Equipment , Single Arm Drop Test Machine Application: AS-DT-200 Falling Impact Testing Machine, Single-arm Drop Test Machine is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design. Single-arm Drop Test...

Brand Name:LIYI

Model Number:ZRS

Place of Origin:Dongguan

...Test Equipment/ Plastic Testing Machine Basic introduction: 1. glow wire test apparatus Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. glow wire test apparatus Using electricity heating regulation material (Ni80 / Cr20) of resistanse wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min,then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or holde burning time ,also test

Brand Name:LIYI

Model Number:LY-3018

Place of Origin:CHINA

...Plastic Testing Equipment , Plastic Dynamic Static Friction Tester Coefficient of friction tester can measure the coefficient of static friction and dynamic friction when materials are sliding. It is applicable for the packaging trade, plastic film plants, testing...

Brand Name:KEJIAN

Model Number:KJ-3090

Place of Origin:Dongguan China

...Test Machine Charpy Impact Plastic Testing Machine Plastic Testing Instruments Uses: Digital izod impact testing equipment is used to test the impact toughness of the non-metallic materials such as plastic, reinforced nylon, fiberglass, ceramics, cast stone, plastic...