omron temperature controller

Brand Name:GME

Model Number:REX-C100 Temperature Controller

Place of Origin:China

...Temperature Controller , intelligent temperature controller General Description 1. The product adopts digital calibration technology for input measurement and support various thermocouples and resistances, max resolution could reach to 0.01°C. 2. With advanced PID intelligent control...

Brand Name:ANGES

Model Number:9kw

Place of Origin:China

...temperature controllers are used to heat up mould and maintain at set temperature. The use of mold temperature machine can reduce the preheating time of the mold, improve the surface quality of the finished product and fully automate the production. Improving die life is improving productivity. Model AM-6W AM-9W AM-12W AM-18W AM-24W AM-36W Heat transfer medium Water Max.Temperature...

Brand Name:ORSTE

Model Number:OMT-610-O

Place of Origin:Dongguan, China

...Temperature Controller Unit 3 Phase 380V 50Hz OMT-O Mold Temperature Controller Heater.pdf NAMING PRINCIPLE of Mould Temperature Control OMT – xxxx – xx ① ② ③ ① Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTO:Medium is Oil with High temperature D: Dual-heating Zones Product Features of Mould Temperature Control...

Place of Origin:Dongguan, China

Brand Name:ORSTE

Model Number:OMT-910-O

...Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTO: Medium is Oil with High temperature D: Dual-heating Zones Product Features of Industrial Temperature Controller Equipped with

Brand Name:ORSTE

Model Number:OMT-610-O ~ OMT-1220-HTO

Place of Origin:Dongguan, China

...Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTO:Medium is Oil with High temperature D: Dual-heating Zones Product Features of Heater Temperature Controller Equipped with the

Brand Name:ORSTE

Model Number:OMT-610-O ~ OMT-1220-HTO

Place of Origin:Dongguan, China

...Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTO:Medium is Oil with High temperature D: Dual-heating Zones Product Features of Oil Temperature Control Unit Equipped with the

Brand Name:ORSTE

Model Number:OMT-605-W ~ OMT-1010-HTW

Place of Origin:Dongguan, China

...h the design of one week automatic start/stop timer, screen can be converted between Chinese and English. P. I. D. multi-stage temperature control system can maintain a mold temperature with an accuracy of ±1oC. Adopts high efficiency water cycle pump,

Place of Origin:China

Brand Name:GME

...Temperature Controller for Hot runner system 1. Description Touch screen Temperature Controller for Plastic Injection Machine Hot runner System offer customized number of control zones and form factors. This controller is ideal for regular molding machines without sequential fill capability. It allows operators to program the controller according their specific molding needs. Each control...

Brand Name:GME

Place of Origin:China

...Temperature Controller for Injection Molding Systems 1. Description Touch screen Temperature Controller for Plastic Injection Machine Hot runner System offer customized number of control zones and form factors. This controller is ideal for regular molding machines without sequential fill capability. It allows operators to program the controller according their specific molding needs. Each control...

Brand Name:Omron

Model Number:CS1D-CPU67H

Place of Origin:China/Japan

... of them executes the system I/O while the other remains on standby. If an error (see note) occurs in the controlling CPU Unit (called the active CPU Unit), control is switched to the other CPU Unit (called the standby CPU Unit), and operation continues.

Brand Name:OCSTAT

Model Number:ST7RF

Place of Origin:China

Weekly Programmable LCD Display Air Conditioner Room Temperature Control Heating Thermostat Production details: Transmitter: 1>2*AAsize battery 2>6 time&6temp, per day 3>7 day programmable 4>868 Mhz for more stable communication 5>...

Brand Name:GME

Place of Origin:China

...Temperature Controller for plastic injection mold​ 1. Specification Power Supply 1-phase 3-wire, 240Vac, 50/60Hz 3-phase 4-wire, 240Vac, 50/60Hz 3-phase 5-wire, 380Vac, 50/60Hz Mainframe Black Control Module HRTC-A / HRTC-B / HRTC-C / HRTC-G Sensor Type Thermocouple J or K Module Qt'y 16 Temperature Control 0~450℃(32~842℉) Control Mode Auto-PID / Manual Output Type Zero Cross / Phase Angle Control

Place of Origin:China water mold temperature controller

Brand Name:RISINGSUN mould temperature controller

Model Number:RS-TM-3600W

... to heat up the mould and maintain this temperature. Besides, they can also be used in other similar applications. High temperature water from the mould is cooled by direct cooling and then sent to the pipe heaters via high-pressure pump for heating to a

Brand Name:ORSTE

Model Number:OMT-610-O ~ OMT-1220-HTO

Place of Origin:Dongguan, China

...Temperature Controller Machine For Plastic Injection OMT-O Mold Temperature Controller Heater.pdf NAMING PRINCIPLE of Injection Molding Temperature Controller OMT – xxxx – xx ① ② ③ ① Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTO:Medium is Oil with High temperature D: Dual-heating Zones Product Features of Injection Molding Temperature

Brand Name:Adcol

Model Number:Adcol thermostat

Place of Origin:China

...been delayed, When the cabinet temperature is greater than (control temperature + temperature difference), the compressor starts​ . Cabinet temperature is less than the control temperature, the compressor stops.| •​ To protect the compressor,​ the

Brand Name:GME

Model Number:16A

Place of Origin:China

...controller , Multi zone Temperature Controller for Plastic Injection Machine Characteristic Short circuit, open circuit and system failure dual protection； Segmentation heating and soft-start function Pattern recognition,Plug and Play Automatic or manual heating can be selectable Degree C or F selectable Thermocouple Type J standard, Type K selectable Automatically compensates for ambient temperature Over Temperature

Brand Name:GME

Place of Origin:China

...Temperature: 0°C ~50°C, RH: 35%~85% Display accuracy 0.1°C Connection methods Terminal Color: black Packaging & Delivery Packaging Details: in Cartons Delivery Detail: 1 -15 days XMT 2C Series Temperature Controller: uses SCM to control the circuit. Analog...

Place of Origin:China

Brand Name:TOPTION

...temperature control system Two-level compressor single liquid temperature control system uses heat energy (steam, cooling water and ultra-low temperature liquid – that is primary system) integrated into single liquid system or two-level return circuit to control the temperature of machine, that is only one heat oil flows into jacketed layer of reactor, It controls the temperature

Brand Name:ORSTE

Model Number:OMT-1220-WD

Place of Origin:Dongguan, China

... design of one week automatic start/stop timer, screen can be converted between Chinese and English. P. I. D. multi-stage temperature control system can maintain a mold temperature with an accuracy of ±1oC. Adopts high efficiency water cycle pump, which

Place of Origin:Dongguan, China

Brand Name:ORSTE

Model Number:OMT-605-W ~ OMT-1210-HTW

...h the design of one week automatic start/stop timer, screen can be converted between Chinese and English. P. I. D. multi-stage temperature control system can maintain a mold temperature with an accuracy of ±1oC. Adopts high efficiency water cycle pump,