gx53 lamp cap gauge

Brand Name:Kingpo

Model Number:KP-7006-29L-4

Place of Origin:china

... on finished lamps. TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X. Only the weight of the gauge itself shall be used in the test. Related gauges:

Brand Name:Kingpo

Model Number:KP-7006-29-3

Place of Origin:china

... Lampholders. TESTING: The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge until plane W reaches plane V or projects beyond it. For E26/24 capped lamps, when surfaces V and W are

Brand Name:Kingpo

Model Number:7006-27-7

Place of Origin:china

...: to check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps. Testing: when the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or

Brand Name:Kingpo

Model Number:7006-44-4

Place of Origin:china

...lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G13. Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge...

Brand Name:PEGO

Model Number:B22

Place of Origin:China

...finished lamps. Testing: caps on finished lamps shall be assured to be correct if the gauge does not pass over the cap by its own weight. “Go” Gauges for B22 Caps on Finished Lamps(7006-11-8) Purpose: to check dimension A max, N min, D1 max, and the

Brand Name:Kingpo

Model Number:7006-55-2

Place of Origin:china

...lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing protection against accidental contact E14-7006-55-2 Purpose: to check protection against accidental contact. Testing: the shape of the lamp with regard to protection against accidental contact is assumed to be correct if the test sample being pushed as far as possible into the gauge, plane W does not protrude beyond plane V. “NOT GO” GAUGE FOR E14 CAPS...

Brand Name:Kingpo

Model Number:KP-7006-29D-1

Place of Origin:china

... cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, surface W shall not project beyond surface V. In this instance, the cap shall be so positioned that the

Place of Origin:china

Brand Name:kingpo

Model Number:7006-27

7006-52-1 Lamp cap gauge for finished lamps fitted with E40 caps for testing contact making Standard E40 Lamp cap gauge 7006-52-1 gauge for finished lamps fitted with E40 caps for testing contact making IEC60061-3

Brand Name:PEGO

Model Number:G13

Place of Origin:China

...lamp Cap Gauge Go Gauge 7006 - 45 and No Go Gauge 7006 - 44 “Go” Gauge for Bi-pin Cap G13 on Finished Lamps (7006-45-4) Purpose: to check dimensions E max,, F min, F max, and the combined pin diameter and displacement of pin (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge...

Brand Name:PEGO

Model Number:E27

Place of Origin:China

... for contact making in IEC holders. Testing: the shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge till plane W reaches plane V or projects beyond it. Gauge for E27 Caps on

Brand Name:PEGO

Model Number:E27

Place of Origin:China

...dimension T1 minimum of caps on finished lamps shown on sheet 7004-21. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with or project beyond surface X. Not Go Gauge for

Brand Name:Kingpo

Model Number:KP-7006-29C-2

Place of Origin:china

...been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, surface W shall not project beyond surface V. In this instance, the cap shall be so positioned that the solder on the

Brand Name:SHC

Model Number:SC-E12C1

Place of Origin:China

...E12 "Not Go"gauges for E12 caps on finished lamps SC-E12C3 IEC60061-3,7006-27J-1 E12 Additional "Go" gauge for caps on finished lamps E12 SC-E12C4 IEC60061-3,7006-32-1 E12 Gauge for finished lamps fitted with E12 caps for testing contact making 7006-27H-1

Brand Name:SHC

Model Number:SC-E12C1

Place of Origin:China

...E12 "Not Go"gauges for E12 caps on finished lamps SC-E12C3 IEC60061-3,7006-27J-1 E12 Additional "Go" gauge for caps on finished lamps E12 SC-E12C4 IEC60061-3,7006-32-1 E12 Gauge for finished lamps fitted with E12 caps for testing contact making 7006-27H-1

Brand Name:Kingpo

Model Number:KP-7006-27D-3

Place of Origin:china

...Lamp cap gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in millimetres - Dimensions en millimètres The drawing is intended only to illustrate the essential dimensions of the gauge. Le dessin a pour seul but d’illustrer les dimensions essentielles du calibre. For details of caps...

Brand Name:kingpo

Model Number:7006-79-2

Place of Origin:china

... (1) This section is used only to provide additional mass so as to bring the total mass of the gauge to the required value. PURPOSE: To check dimensions Fmin., Fmax. and the combined pin diameter and displacement of pins (including bosses) of caps G10q,

Brand Name:SHC

Model Number:SC-G13C

Place of Origin:China

...Lamp Cap Gauge Bi Pin Go No Go Pin Gauge On Finished Lamps T8 G13 Gauge list: IEC60061-3,7006-45-4 G13(T8) Go gauge for bi-pin cap on finished lamps IEC60061-3,7006-44-5 G13(T8) Go and not go gauge for unmounted bi-pin cap Conforms To: IEC60968-1, IEC60061-3 G13 7006-45-4 Go gauge for bi-pin cap on finished lamps...

Brand Name:SHC

Model Number:SC-G13C

Place of Origin:China

...Lamp Cap Gauge Bi Pin Go No Go Pin Gauge On Finished Lamps T8 G13 Gauge list: IEC60061-3,7006-45-4 G13(T8) Go gauge for bi-pin cap on finished lamps IEC60061-3,7006-44-5 G13(T8) Go and not go gauge for unmounted bi-pin cap Conforms To: IEC60968-1, IEC60061-3 G13 7006-45-4 Go gauge for bi-pin cap on finished lamps...

Brand Name:SHC

Model Number:SC-E26C1

Place of Origin:China

...Lamp Cap Gauge Go No Go Gauge For Testing Contact - Making Of Lamps Fitted With Caps Confirms: IEC60061-3 Gauge name and Testing Purpose 1. E26, E26/50x39, E26/51x39 & E26d​ “NOT GO” GAUGE FOR CAPS 7006-29L-4 TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X. Only the weight of the gauge...

Brand Name:SHC

Model Number:SC-E26C1

Place of Origin:China

...Lamp Cap Gauge Go No Go Gauge For Testing Contact - Making Of Lamps Fitted With Caps Confirms: IEC60061-3 Gauge name and Testing Purpose 1. E26, E26/50x39, E26/51x39 & E26d​ “NOT GO” GAUGE FOR CAPS 7006-29L-4 TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X. Only the weight of the gauge...