glow wire ignition test

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

...Ignitable Glow Wire Ignition Test Programmable Sus304stainless Steel Standard Gb5169 5114 glow wire tester machine Technology data: accord with standard:GB5169/IEC60695 SIZE:1120W*600D*1020H Glow wire: Φ4mm Ni/Cr(80/20) Thermocouple: Φ0.5mm K style Heating temperature: 50℃ ～1050 ℃ Sample test...

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Glowing Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

... of an insulating material from an electrically heated wire is described in the Method for Glow-Wire Ignitability Test on Materials, IEC 695-2-1 /3. Flammability Testing Equipment 34.1 .2 The Glow-Wire Ignition Temperature (GWIT) is to be assigned as the

Model Number:FGW

Glow wire ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material by the effect of a glowing

Brand Name:Sinuo

Model Number:SN772C

Place of Origin:China

...Glow Wire Flammability Test Chamber Complied Standards & Clauses IEC60695-2-10 "Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure" IEC 60695-2-11 "Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)" IEC 60695-2-12 "Fire hazard testing - Part 2-12: Glowing/hot-wire...

Place of Origin:China

Brand Name:GC

Model Number:GC-ZRS-C

Glow Wire Flame Test Chamber With Manual Control Product Description This testing machine is mainly used to simulate the thermal stress caused by heat sources or ignition sources such as hot components or overloaded resistors in a short time under fault...

Brand Name:PEGO

Model Number:GW-1

Place of Origin:China

...Glow / Hot Wire Flammability Testing Equipment for GWIT and GWFI Testing 1. Introduction of Glow Wire Flammability Testing Machine Glow wire flammability testing equipment is an electrical safety test designed to evaluate the flame resistant properties of plastic materials used in electrical devices. The purpose of glow wire flammability testing...

Brand Name:SKYLINE

Model Number:SL-7608

Place of Origin:China

Glow-wire Flammability Testing Equipment IEC60695-2-10~13 GB/T5169 Standards According to IEC60695-2-10~13,UL746A, IEC829, DIN695, VDE0471etc. ...

Brand Name:KINGPO

Place of Origin:Mainland China

...Glow Wire Thermocouple Flammability Testing Equipment 1.Product information: Imported with original packaging insulation high temperature resistance armour thermocouple,0.5mm type K, armour heat-resisting1100℃(is superior to the standard 1050℃) 2.Deal board: Use deal board of 20cm*20cm for glow wire testing...

Brand Name:HUST Tony

Model Number:HTB-007

Place of Origin:china

Glow Wire Testing Chamber comply with IEC60695-2-10 -13:IEC 60335-1,IEC 60598-1 and IEC60745 Features: 1.0 They system comply with standards of IEC60695-2-10 :2013 ～ IEC60695-2-13 :2013,IEC 60335-1,IEC 60598-1 and IEC60745. 2.0 Glow wire material: Ni/Cr wire with 4 mm diameter 3.0 Temperature range: 50 ℃ ～ 960 ℃ 4.0 Current range: 0-200 Ampere 5.0 Input power: 220V/50Hz 6.0 Including thermocouple and 1℃ resolution display to monitor the wire

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

Glow Wire Tester Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat source or an ignition...

Brand Name:JIEDONG

Model Number:JD-3052

Place of Origin:Guangdong, China

...Wire Bending Glow Wire Test Equipment Glow wire testing machine JD-3052 product description: The glow wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550°C to 960°C) for 1 minute, and then burns at a specified pressure (1.0N). The hot test sample is 30s, and the ignition...

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire...

Brand Name:LIYI

Model Number:LY-ZRS

Place of Origin:China

...Glow-wire Test Machine for Electronic Components Usage: Glow-wire Test Apparatus is according to IEC60695-2-1 and 2-10 and Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, testing methods of Glow wire, basic testing methods of Glow wire device> and UL 746A, IEC829, DIN695, VDE0471, the Glow wire...

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test...

Brand Name:HOOHA

Model Number:ZY6112 UL1666

Place of Origin:China

...Glow Wire Test Apparatus Vertical Pipe Vertical Combustion Testing Scope of application: It is suitable for the evaluation of the combustion performance of the wiring and elevator in the piping between the building and the floor. Meet the standard: UL1666>. Main features: Components: The burner consists of a 1/2inch steel pipe, a 1/2inch tube elbow and a steel ignition dispersion disk. Test...

Brand Name:HOOHA

Model Number:ZY6112 UL1666

Place of Origin:Guangdong

...Glow Wire Test Apparatus Vertical Pipe Vertical Combustion Testing Scope of application: It is suitable for the evaluation of the combustion performance of the wiring and elevator in the piping between the building and the floor. Meet the standard: UL1666>. Main features: Components: The burner consists of a 1/2inch steel pipe, a 1/2inch tube elbow and a steel ignition dispersion disk. Test...