ft4 flame test

Brand Name:PEGO GROUP

Model Number:VW-1

Place of Origin:China

... and UL2556, it is applied to test the resistance of a wire, cable or cord to the horizontal and vertical propagation of the flame (VTM, VW-1, FT-1 and FT-2 classifaction). The flammability test uses a bunsen burner of a specified size (inside diameter of

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Test sample: It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. Feature: The

Brand Name:PEGO

Model Number:HVR-4

Place of Origin:China

...-11-4 and IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. HVR-4 horizontal and vertical flame test apparatus is applied to the V-0, V-1, V-2, HB and 5V materials, it is

Brand Name:BOTO

Place of Origin:China

...Outer box dimensions 110*650*125(cm) Box volume ≥0.5m³,With glass observation door Flame time 0-99 minutes and 99 seconds can be set, accuracy ±0.1 second Residual flame time 0-99 minutes and 99 seconds can be set, accuracy ±0.1 second The rest of the

Brand Name:YUYANG

Model Number:YY411

Place of Origin:China

... specimen. Following ignition, any flame front which develops is noted and a record is made of the progression of the flame front horizontally along the length of the specimen in terms of the time it takes to travel to various distances. The results are

Brand Name:DAXIAN

Model Number:DX8651

Place of Origin:China

... a test specimen. - Following ignition, any flame front which develops is noted and a record is made of the progression of the flame front horizontally along the length of the specimen in terms of the time it takes to travel to various distances. - The

Brand Name:YUYANG

Model Number:YY611

Place of Origin:China

...Flame Testing Machine AC220V, 50HZ Descriptions: UL1581 Wire and Cable Flame Test Chamber is used to test the flame retardant performance of insulation layer under abnormal conditions such as overheat and overcurrent.This sect will be manufactured strictly according to UL1581 sect 1080.1~1080.14 , which fully meets the VW-1 Flame Test...

Brand Name:YUYANG

Model Number:YY611

Place of Origin:China

... will be manufactured strictly according to UL1581 sect 1080.1~1080.14 and approved by Guangzhou MEIhua UL Co., LTD., which fully meets the VW-1 Flame Test standard and is applicable to FT-1 and FT-2 of UL1581.The

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

...Testing Equipment For Needle Flame Test Stainless Steel Housing Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame...

Brand Name:DAXIAN

Model Number:UL 1685

Place of Origin:China

...Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable is evaluated by igniting the specimen with a vertically placed flame...

Brand Name:BAXIT

Model Number:BXT-ZY

Place of Origin:Shanghai, China(mainland)

Needle Flame Testing Machine Combustion Test Equipment The needle flame testing machine is designed and manufactured according to the corresponding requirements of IEC60695-2-2, GB5169.5-97, GB4706.1-98, and is suitable for the flame resistance test of non...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

... the resistance of insulating materials and small components to ignition caused by a minor flame source. It simulates the localized flame that may occur due to electrical faults, overheating, or component failure in electrical and electronic products.

Place of Origin:China

Brand Name:GC

Model Number:GC-UL-A

... of plastic materials, and performing horizontal and vertical flammability tests on the plastic parts of equipment and appliances. It is equipped with a gas flow meter to adjust the flame size and is driven by a motor. The operation is simple and

Place of Origin:China

Brand Name:GC

Model Number:GC-UL-C

...evaluate the flammability of materials used in electrical and electronic devices. It is designed to simulate the conditions of a small flame ignition source that may occur in these devices. The machine consists of a combustion chamber with a burner at the

Brand Name:ZL

Model Number:ZL-1028

Place of Origin:China

...Flame Test Chamber VW-1 Flame Tester FT1/FT2 Flame Test Chamber Technical Description: The single wire and cable vertical burning tester is suitable for measuring the vertical burning non-invasive performance of single plastic wire, control wire, cross-linked, elevator, ship, mining cable and so on. Can also be made of high self-extinguishing low-smoke halogen-free flame...

Brand Name:Sinuo

Model Number:SN773A

Place of Origin:China

... result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...-11-5, it is required by many of standard requirements, such as IEC60335-1 clause 30.2.3.2, Annex E, etc. The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of

Place of Origin:China

Brand Name:KeRang

... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance,

Brand Name:DAXIAN

Model Number:DX8516

Place of Origin:China

... contact, etc., flames may be caused, which may then shoot onto nearby parts. The needle flame test simulates the small flames generated inside the product under fault conditions and evaluates the fire hazard using simulation technology. Test standards:

Brand Name:BAXIT

Model Number:BXT-ZY

Place of Origin:Shanghai, China(mainland)

Needle Flame Testing Machine The needle flame testing machine is designed and manufactured according to the corresponding requirements of IEC60695-2-2, GB5169.5-97, GB4706.1-98, and is suitable for the flame resistance test of non-metallic materials. The ...