cir170 shank dth button bits

Brand Name:MIROC

Model Number:DTH Button Bit

Place of Origin:China

...in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. Basic Information Product DTH Button Bits Low Air Prussure CIR80, CIR90 3'' High Air Prussure DHD3.5, M30,

Brand Name:ROSCHEN

Place of Origin:Germany,China

Model Number:3"~12"

QL30 QL40 QL50 QL60 QL80 Shank DTH button bits for DTH drilling QL30 QL40 QL50 QL60 QL80 Shank DTH button bits for DTH drilling DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, ...

Brand Name:MING

Model Number:BIT250mm-CIR170

Place of Origin:CHINA

... bit description: KINGDRILLING hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a spline drive for rotating the bit in the ground.

Brand Name:SOLLROC

Model Number:CIR130 CIR170 dth bits

Place of Origin:China

...CIR170 DTH Bit Rock Drill Bits for Rock Drilling​ Description: CIR130 CIR170 DTH Button Bits for Drilling Hole 1. High and low air pressure down-the-hole drill bits 2. Low air pressure holeDia.: 65-220mm 3. High air pressure hole Dia.: 85-305mm 4. Face type: Drop center/concave/convex/double gauge/flat 5. Our DTH Bit can be suitable for many types of DTH...

Brand Name:SUVEC

Model Number:DTH Hammer Bits

Place of Origin:China

... Bit, Low Air Pressure DTH Button Bit, High Air Pressure DTH Button Bit In DTH drilling, the down the hole rock drilling hammer bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the

Brand Name:New Diamond

Model Number:SP780

Place of Origin:Hunan, China (Mainland)

...Shank DTH Drill Bits Alloy Steel Material Low Consumption For DTH Drilling Description Hunan New Diamond offers top quality DTH hammers and bits which have been tested in the hardest rock formation. Our bits use quality hardened steel alloy for the bit body and premium quality tungsten carbide buttons. With superb performance and long life span. Our bits won high reputation among our customers. 1. Button...

Brand Name:QIDELI

Model Number:CIR170

Place of Origin:PUTIAN FUJIAN CHINA

CIR170-300MM BITS FOR PV DRILLING. QIDELI BRAND QDL BITS Our company is one of the earliest manufacturers with mature production technology of low-pressure drilling tools in China. Our company has been engaged in the production of low-pressure drilling tools for more than 15 years, with mature processing technology, advanced heat treatment technology and rich production experience. 1.Our company focus on CIR series DTH hammer and bits...

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

...: 76mm to 315mm; DTH button bit shank style: DHD3.5, DHD340, DHD350, DHD360, DHD380, COP34,COP44,COP54,COP64,COP84, SD4, SD5, SD6, SD8, ...

Brand Name:HLDRILL

Place of Origin:Liaocheng , Shandong , China

..., water borewell, foundation anchoring, hard rock drilling. OEM available, HengLong direct supply, long service life DTH drill bits worldwide delivery. Our TCIR90 90mm DTH BIT is an

Brand Name:OED/OEM

Model Number:3 inch 4 inch 5 inches 6 inches

Place of Origin:China

DTH Button Bit 12 Inches 35° DTH Tools for Mining Quarry for Shank NUMA QL120 DHD112 DTH Hammers And Button Bits DTH Hammers Are Used For High Air Pressure Mining Dth Hammerblast Hole Drilling And Water Well Drilling Project. Working With DTH Drilling Pipe And DTH Drill Bit, Mainly Applied In Mining, Marble Quarry Or Well Drilling And Other Construction Projects. Diameter No. of Buttons Buttons*Button Diameter (mm) Gauge Buttons...

Brand Name:SHITAN

Model Number:ST

Place of Origin:HEBEI CHINA

Big Drilling MachineTools Forging 178mm DTH Button Bits 1.Product description Diameter (mm) No. * Button diameter (mm) Gauge/Button angle. Flushing holes Weight (kg) Bit shanks Outer Front 178 8*Φ16 11*Φ16 35 2 27 DHD360 2.Pre-sale service Act as a good ...

Brand Name:MIROC by KSQ

Model Number:DHD380

Place of Origin:China (Mainland)

...bit High Pressure 8 inch DTH Button Bits for water well drilling rig Product Description The DTH bit is the tool cutting rock. Miroc DTH bit for mining is made of superior quality alloy steel .Besides, all our DTH bit is using best quality carbides. In addition art manufacturing technology makes our DTH bit for mining is with higher and more reliable quality. 1.high and low air pressure down-the-hole drill bits...

Brand Name:SANROCK

Model Number:DHD380 -203mm

Place of Origin:Zhejiang, China

... Down-The-Hole (DTH) button bit features a robust design with strategically placed tungsten carbide buttons for optimal impact energy transfer. It ensures fast penetration, extended service life, and high stability under intense drilling conditions.

Brand Name:Tianying

Model Number:DTH bits

Place of Origin:CHINA

DTH Bit, DTH Button Bit, DTH hammers and bits for rock drilling tools Thread button/drill bit features: Made from top quality steel and tungsten carbide as same as internationally well-known brand Apply “hot-insertion” processing procedure to insert the buttons...

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

...DTH Button Bits High Air Pressure JCDRILL DTH Drill Bits Description DTH Drill Button Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance. DTH hammer bits...

Brand Name:none

Model Number:many

Place of Origin:Zhuzhou China

...Buttons for DTH button bits Grade and Applications: Grades Density T.R.S Hardness Performance &application recommended Approx grades in China g/cm³ Mp α HRA MK4 15.1 1800 90 Mainly used as small buttons for percussion bits to cut soft and medium hard formations. YG4C MK6 14.9 2100 90 For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits...